RedTiger Dash Cam App Guide: WiFi Setup and Footage Transfer

What Is the RedTiger Dash Cam App?

The RedTiger dash cam app — available as "RedTiger_CAM" on both iOS and Android — turns your phone into a live viewfinder for your dash cam. Instead of wrestling with a tiny 2-inch screen or pulling the SD card out every time you want to grab a clip, you connect over WiFi and do everything from your phone. You can watch real-time footage, download recorded videos, change settings, update firmware, and even format your SD card without leaving the driver's seat.

Every current RedTiger model supports the app — the F7N Elite, F7NP, F7N Touch, and ViewClear 70 all ship with built-in WiFi. The setup takes about 90 seconds once you know the trick, and after that pulling a clip of that guy who cut you off takes maybe 30 seconds total.

How to Download and Install the App

Head to the App Store (iOS) or Google Play Store (Android) and search for "RedTiger_CAM." The icon is a red camera lens on a white background, developed by WHILAS Technology. Make sure you're grabbing the right one — there are a few generic dash cam apps out there that look similar but won't connect to RedTiger hardware.

Alternatively, you can scan the QR code printed on the box or in the quick-start guide that came with your dash cam. That QR takes you directly to the correct app in your app store. Pro tip: bookmark this page — you won't always have the box handy when you need to reconnect after a factory reset.

Connecting Your Phone to the Dash Cam's WiFi

Here's the part that trips most people up: the dash cam creates its own WiFi network, and your phone has to connect to that network — not your home WiFi or mobile hotspot. Follow these steps:

1. Turn on your dash cam — it needs to be powered (either via the cigarette lighter adapter or a hardwire kit) and recording or idle.
2. Enable WiFi on the dash cam — press the WiFi button on the unit. On the F7N Elite, it's the top-right button labeled with a WiFi icon. The screen should show "WiFi: ON."
3. Open your phone's WiFi settings — look for a network starting with "RedTiger_" followed by a 4-digit code. It's an open network (no password needed).
4. Connect to that network — your phone may warn that this network has no internet access. That's normal and expected. Tap "Connect" anyway.
5. Launch the RedTiger_CAM app — within 5-10 seconds the app should detect your dash cam and show a live camera feed.

That's it. Once you're connected once, the app remembers the dash cam's network and reconnects automatically on future uses. You just turn on WiFi, open the app, and you're in.

Transferring and Saving Footage to Your Phone

With the app open and connected, you'll see a live view from the front camera (and rear camera on dual-channel models like the F7N Elite and F7NP). To download footage:

• Tap the gallery icon in the bottom-right corner of the app. This shows all files on the SD card, organized by date.
• Browse by date and type — videos are labeled by timestamp. Locked/emergency files have a lock icon and sit in a separate "Event" folder. Normal loop recordings are in the "Normal" folder.
• Select a file and tap the download button (downward arrow icon). The file transfers to your phone's camera roll at the dash cam's native resolution — 4K on the F7N Elite, 2.5K on the F7NP.
• Wait for transfer — a 1-minute 4K clip is roughly 350-400MB over WiFi. That takes about 45-60 seconds on a good connection. Shorter clips for insurance purposes (30 seconds) transfer in under 15 seconds.

If you're grabbing a clip to share on social media or send in an insurance claim, download it in the app first, then share directly from your phone gallery — the WiFi transfer preserves the original quality.

Adjusting Dash Cam Settings Through the App

Changing settings on the dash cam's tiny screen is a pain. The app makes it dead simple. Tap the gear icon in the app to access the full settings menu:

• Video resolution — switch between 4K@30fps, 2.5K@30fps, and 1080p@60fps. Lower resolution gives smoother frame rates for night driving.
• Loop recording length — 1-minute, 3-minute, or 5-minute clips. Most people stick with 3 minutes — short enough to find what you need, long enough that you're not drowning in files.
• Parking mode sensitivity — adjust motion detection and G-sensor thresholds to avoid false triggers from wind or passing trucks.
• Date and time stamp — the app sets this automatically from your phone's GPS, which fixes the #1 dash cam headache of incorrect timestamps.
• Firmware updates — the app checks for new firmware when connected. If there's an update, it downloads and installs through the app in about 5-7 minutes. You can get the latest firmware from the official RedTiger product page as well.

Why WiFi Transfer Beats Pulling the SD Card

Before these apps existed, getting footage off a dash cam meant shutting everything down, finding a microSD card adapter, plugging it into a laptop, hunting through folders, and hoping the file wasn't corrupted. With the RedTiger app, you stay in your car, the camera keeps recording, and you're done in under a minute. For insurance claims especially, being able to pull the clip immediately at the scene — while the other driver is still there — is a massive advantage.

Common WiFi Connection Issues and Fixes

• "No internet" warning on your phone — dashboard cameras create a direct WiFi link, not a hotspot with internet access. Dismiss the warning and proceed. The app works over the local connection.
• App doesn't detect the dash cam — make sure you're connected to the "RedTiger_" network and not your home WiFi. Turn off mobile data or set WiFi as the priority connection. On some Android phones, you need to turn off "auto-switch to better network" in WiFi settings.
• Video transfer keeps failing — SD card speed matters. Use a U3-rated card (Samsung EVO Select or SanDisk Extreme are both reliable options). Slower cards cause transfer timeouts.
• WiFi keeps disconnecting — keep your phone within 10 feet of the dash cam. The WiFi module in the camera isn't designed for range, it's designed for low power consumption inside the car. Sitting in the driver's seat is perfect. Sitting in the back seat with the phone in a bag might not work.

← Back to Blog